Reynolds Industries Inc. - High Voltage Connectors, High Voltage Cable Assemblies, High Voltage Wire, High Voltage Cable, High Voltage Capacitors

	Home Company Information Products & Services Customer Support Teledyne Companies

Products
	High Voltage Wire and Cable
	High Voltage Single-Pin Connectors
	38999 High Voltage Hi/Mate Contacts
	High Voltage Multi-Pin Connectors
	Sub-D Hi/Mate
	Advanced Series
	Fiber Optic Connectors
	Ceramic to Metal Brazed Connectors
	High Voltage Capacitors
	Spark Gap
	High Voltage Multipliers
	Special Products
Company Information
	About Us
	Facilities
	History
	Directory
Contact Us
	Customer Satisfaction Survey
	Sales
	RMA Request for Helmet Mounted Display Harness Assemblies
	Doing Business with TRI
	Supplier Portal
	Search

New! HI/Mate RB series for use as in-line connectors

Hi/Mate high voltage Lead Assemblies are excellent for use within power supplies or cabling to reliably connect and disconnect system components. Designed primarily for breadboard or prototype testing, the leads can also be used in a production system where DC high voltage, low current inter-connections are required.
The RB series lead assemblies use Reynolds exclusive Advanced Interface Sealing System.Mated assemblies are rated at 13.5 KVDC from sea level to 70,000 feet, require no encapsulation or potting and can be mated and unmated numerous times. No tools are required for assembly or disassembly.

The Advanced Interface Sealing System
HI/Mate-D uses the high voltage interface sealing developed by Reynolds for its proven, highly successful Advanced series of connectors. Illustrations not to scale.

Plug lead Assembly
P/N 178-6433

3 Piece Holder
P/N 178-6432

Receptacle lead Assembly
P/N 178-6434

Mated Lead Assemblies
(shown in holder)

Ordering
3 piece thermoplastic holder: Order P/N 178-6432
Plug lead assembly: Order P/N 178-6433.
Receptacle lead assembly: Order P/N 178-6434
Be sure to specify Lead length. When no length is specified, a 12 inch lead length will be shipped.

Assembly
CAUTION: 1. Never handle the lead assemblies when power is applied. 2. Never apply power to unmated lead assemblies.
Step 1: Slide the left retainer over the lead of the plug assembly and feed the HiMate plug assembly through the holder body Step 2: Mate the Plug assembly to the Receptacle assembly until they bottom out. When properly mated there will be a gap as shown. Step 3: Squeeze the left retainer and position it just inside the holder body and then release the squeeze pressure. The retainer should be locked in place. If not repeat step 3. Step 4: Slide the mated assembly to the left inside the holder body until it bottoms out. Squeeze the right retainer and position it just inside the holder body and release the squeeze pressure as in step 4. Assembly is complete.

Download this page as a PDF for best print quality.

<<Back

Back to Contents

View Quote Request

Submit Tech Support Request