|
|
|
 |
Magnum is a quality directed series of multi-pin, high voltage connectors and cable assemblies. This series signifies the large number of design solutions possible with this series of connectors because they are mechanical assemblies built-up from pre-tested, detail components, as contrasted to a conventional, one piece, molded-in-place cable assembly.
The Magnum construction allows the stress testing of details, such as plastic insulators and elastomeric dielectric interface seals, prior to final assembly which results in a much higher level of quality and reliability. It is also possible, in many cases, to replace damaged receptacle seals and the individual plug leads rather than discarding an entire cable assembly.
Features:
- Standard 6 pin configuration
- Rugged stainless steel shells which eliminate concern for plating flakes contaminating dielectric interfaces
- Bayonet coupling with a handle to ease mating in confined spaces
- A metal, right angle, shielded, cable strain relief
- Receptacle dielectric seal replacement
- Four polarizations available
- Optional receptacle configuration for potting, fluid or gas dielectric.
- 12 KVDC rating at -55°C to +125°C at 70,000 feet altitude.
- High voltage “burn-in,” a 100% acceptance and confidence test conducted at simulated operating environments
- Optional corona testing categorized by customer specified partial discharge energy ranges
- Pre-formed cable bundles to eliminate over-stress on contacts and insulators
|
General Specifications
Contact-Female
Design: Split finger, closed entry
Material: BeCu gold plated with CRES hood
Solder Bucket: Accommodates 20 AWG max
Contact-Male-Receptacle
Design: Pin with spherical radius. Size 22 (.030 Dia.)
Material: (Plastic version) BeCu gold plated (Ceramic version) Kovar nickel plated
Solder Bucket: Accommodates 20 AWG max
Insulator- Receptacle and Plug Bodies
Diallyl Phthalate
Insulator Noses-Plug
Thermoplastic
Insulator-Ceramic Receptacle
94% Alumina Oxide, min.
Braze Material 99% pure copper
Dielectric seals & “O” Rings-Plug & Receptacle
Silicone Rubber. Option: Coolanol compatible fluorsilicone rubber
Shell-Plug & Plastic Receptacle
303 CRES Passivated
Shell-Ceramic Receptacle
304 L (Weldable) CRES Passivated
Bayonet Coupling Sleeve-Plug
303 CRES Passivated
Jam Nut-Plastic Receptacle
303 CRES Passivated
Panel Seal-Plastic Receptacle
Ethelene Propylene
Cable Assemblies-Plugs
Standard: Overall shielded 6 conductor .090 diameter silicone coated FEP high voltage cable with right angle termination
Cable Assemblies-Receptacles
Standard: .090 dia Silicone Coated/FEP high voltage cable
Electrical
Test Voltages (Mated): 150% of rated voltage
Rated Voltage: 12 KVDC
Temperature
Storage: -65°C to +125°C Operating: -55°C to +125°C |
Download this page as a PDF for best print quality.
|
|
