R75 Cable Assemblies and Receptacles for Ground Level Applications
|
|
Designed for pulse and DC applications, the R75 series is the vital interconnecting link in many electronic systems. The use of exclusive design techniques assures corona resistant performance up to 75 KVDC.
The R75 series achieves its rugged dependability through factory molding and assembly procedures where cable ends or wire leads become an integral part of the connector
The molded coaxial connector concept with an air reducing interface seal, semiconducting rubber corona shields and special mating threads combine to provide connectors with low corona characteristics and a robustness suitable for operating under adverse environmental conditions.
Applications (limited to ground level)
|
|
|
Applications (limited to ground level)
|
|
|
R75 series assemblies are used in: |
|
- Radar systems
- X-ray systems
- Electron beam equipment
|
- Accelerators
- Electron microscopes
- Pulse applications
- Pulsed and direct current high voltage power supplies
|
|
Interface cleaning
|
|
|
High voltage connectors must always be cleaned prior to mating. The proper cleaning method is to wipe or spray the interface area with isopropyl alcohol and immediately blow an inert gas such as dry nitrogen over the interface area until dry. No other cleaning method should be attempted.
WARNING: These connectors should NEVER be handled, mated or unmated when voltage is applied.
|
|
Download
PDF for all R75 Series General Specifications
|
Home
Products & Services
